|
|
|
Who's Online
There currently are 6036 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
Optema� Series, OS 110 Condenser Capsule
The VSM comes with an OS 110 series capsule that is manufactured in our capsule facility in Conneaut, Ohio. The OS 110 capsule features:
Large Diaphragm Condenser Tube Microphone
The VSM is a cardioid single tube true condenser microphone that features servovalve technology and the exclusive CAD Optema� OS 110 capsule. The VSM is a natural bridge between the valve technology developed for the VX2 microphone and the servo opamp technology developed for the Equitek series microphones. The head amp in the VSM microphone is a 12AX7 tube in a circuit that is optimized for maximum headroom and low noise. The output stage is a high speed dual opamp in a balanced differential configuration that allows long cables to be used without affecting microphone performance.
� True large diameter capsule with 1.1" inside diameter. (1.34" outside diameter.) � 3 Micron thick high tension, diaphragms made from the latest high strength polymer film. � 24K Gold sputtered diaphragm coating. � Each capsule is hand adjusted for proper damping and consistent frequency response. � Other capsule components made from precision machined brass and stainless steel.
Use and Operation
The VSM has extremely wide frequency response and dynamic range with a slight rising response characteristic at 15KHz. The VSM is ideal for both vocal and instrument recording applications. The VSM comes complete with an elastic suspension mount, heavy duty analog power supply, and a 30 foot professional 7 conductor cable.
Mount the microphone in the desired location. Plug the included seven pin cable into the microphone and the power supply. The output of the microphone is at the 3 pin XLR connector on the power supply. Use a standard balanced 3 pin XLR cable to connect the microphone output to the input of your mixer or recorder. Phantom power is not required. Plug the power supply into your AC mains supply. Turn the power supply on using the rocker switch on the right side of the front panel of the power supply. The LED on the rocker switch will light. Allow a few minutes for the vacuum tube in the microphone to warm-up and stabilize. The output level of the VSM is quite high. It is recommended that you start with trim control or input level control turned down on your mixer or recorder. It is also recommended that you turn down your input level whenever changing any of the switch settings on the microphone.
VSM Shock Mount
The VSM shock mount is an integral part of the VSM microphone and only needs to be removed to service the microphone. To remove the shock mount, unscrew the two knurled knobs on either side of the microphone and the knurled knob in the back of the microphone.
|
|
|
> |
|
