The service manual when downloaded and printed out was clear and easy to read. The manual is complete with the schematic diagram and technical data. I occasionally require a manual and now having registered with this company I shall order from them in the future.
Text excerpt from page 31 (click to view)
27
TROUBLESHOOTING
Remote Does Not Work �Check the batteries. If necessary, replace them with 2 AA Heavy Duty (Zinc Chloride) or Alkaline batteries. �Clean the remote control and the remote control sensor window on the TV. �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Be sure the fuse is not blown on the AC power strip, if one is being used. �Check to be sure the TV outlet is not on a wall switch. TV Displays Wrong Channel or No Channels Above 13 �Repeat channel selection. �Add the desired channel numbers (using the CHANNEL EDIT control) into the TV�s memory. �Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels.
No Power �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Check that the outlet is not on a wall switch. �Be sure the fuse is not blown on the AC power strip, if one is being used. No Picture �Check antenna connections. Are they properly secured to the TV's ANT 75� plug? �Check the TUNER MODE control for the correct tuner setting. �Try running the Auto Program feature to find all available channels. �Press the CH+ or CH- buttons on the remote to make sure the correct signal source is selected (FRONT or Current Channel). No Sound �Check the VOLUME buttons. �Check the MUTE button on the remote control. �If you�re attempting to hook up auxiliary equipment, check the audio jack connections located on the front of the TV.
