This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 21 (click to view)
How to check or change a programmed recording (TIMER)
a Press the TIMER k button on the remote control. b Use the =P r or ;P q buttons to select the
Clearing a programmed recording (TIMER)
a Press the TIMER k button on the remote control. b Use the button =P r or ;P q to select the
programmed recording (TIMER) which you wish to clear.
c Press the CLEAR (CL) button.
programmed recording (TIMER) you wish to check or change.
c Press the TIMER k button. d Select the entry field with the QSr or SqP
The selected programmed recording (TIMER) has now been deleted.
d To end, press the MENU button.
button.
e Change any displayed information with the =P r or
;P q
button or with the
0..9
buttons.
f Confirm with the OK button. g Make sure that the cassette you have inserted is not
erase protected.
h Switch off using the STANDBY m button.
D The programmed recording will only function properly, if the TV-Video Combi has been switched off using the button STANDBY m . D If the TV-Video Combi is turned on a few minutes before beginning a programmed recording or if is being used for playback, �PRESS OK TO START RECORDING� will appear on the screen. Change cassettes if necessary. Confirm this message with the button OK , to continue the programmed recording session. The TV-Video Combi switches off during this operation.