perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 3 (click to view)
SAFETY INSTRUCTIONS
Cutting equipment
This section describes how through correct maintenance and through using the right type of cutting equipment you can: � Reduce the machine�s tendency to kickback � Obtain maximum cutting capacity. � Increase the service life of the cutting equipment. The three basic rules: 1)Only use the cutting and guard equipment we recommend! See chapter �Technical data�.
IMPORTANT INFORMATION
EN
The section describes how through correct maintenance and through using the right type of cutting equipment you can reduce the machine�s tendency to kickback, obtain maximum clearing capacity and increase the service life of the cutting equipment. � Only use the cutting and guard equipment we recommend! See chapter �Technical data�. Refer to the instructions for the cutting equipment for the correct winding of cord and for the selection of the right cord diameter. Keep the blade�s teeth well and correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.
�
�
2)Keep the blade�s teeth well and correctly sharpened! Follow our instructions and use the recommended filing gauge. An incorrectly sharpened or damaged blade increases the risk of an accident.
!
WARNING! Incorrect cutting equipment or an incorrectly sharpened blade increases the risk of kickback.
Filing the grass blade
� See the cutting equipment�s packaging for correct filing instructions.
3)Check the cutting equipment with regard to damage and crack formation. Damaged cutting equipment should always be replaced.
� The blades are sharpened using a single cut flat file.
� Sharpen all edges equally to maintain the balance of the blade.
