|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hello from Germany - thank you very much for the manual for my Sharp "Searcher" - the handling of your internet area is outstanding..Mike
;
I am very happy with the owner's manual. I bought a used Casio and was so relieved that I was able to get a hold of a owner's manual. It was very easy to download the manual and I had no problems with printing it. Thank you! Nancy Whalen
;
The purchased manual is an high-quality scan of the original JVC paper-based Owner´s Manual. I am very satisfied!
;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
 ;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
To reinstall shelf: 1. Hold shelf at front and back. 2. Tilt front of shelf up to a 45� angle to track. 3. Insert both rear shelf slides into upper channel of track. 4. Lower front of shelf to a level position. Make sure both rear shelf slides are securely in the track before letting go of shelf.
NOTE: Insert rear shelf slides into upper channel of track. /
Removing
the crisper
and crisper
cover
Pull out to the stop, lift the front, and pull again.
To remove the crisper: Slide the crisper straight out to the 1. stop. 2. Lift the front slightly. 3. Slide out the rest of the way. 4. Replace in reverse order.
Style
I
To remove the cover: 1. Hold cover firmly with both hands and lift front of cover off supports. 2. Lift cover out by pulling up and out. To replace the cover: 1. Fit back of cover into notch supports on walls of refrigerator. 2. Lower front into place.
Lift the cover front, then the back.
Style
2
To remove the cover: 1. Push up glass insert from the bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift cover frame up and out. To replace the cover: 1. Fit back of cover frame into notch supports on walls of refrigerator, then lower front into place. 2. Slide back of glass insert into place, then lower front into place.
13
|
|
|
> |
|
