perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 27 (click to view)
Unloading the Film
Automatic rewind
The camera automatically rewinds the film into the cassette after the last exposure. 1. Wait for the film to completely rewind into the film cassette. � The TEXT-MESSAGING PANEL (30) will display �FILM REWINDING� and the FRAME COUNTER (31) will count down to �0.� When the motor stops running, the text-messaging panel will display �REMOVE FILM.� 2. Turn the camera upside down and slide the FILM-DOOR
1 2
3. Remove the film cassette from the camera and reload with new KODAK ADVANTIX Film. � The FSI on the fully-exposed film cassette will be at " (#3 position).
LATCH (17) to open the FILM DOOR (18) and to
Mid-roll change (MRC) This camera has MRC feature where a partially exposed film cassette can be rewound for later use. The FSI on a partially exposed film cassette will be set to � (#2 position). When you reload the film cassette into the camera, the camera will automatically advance the film to the first unexposed frame. Film can be rewound and reloaded until the last frame is taken. The camera will automatically rewind the film and set the FSI to " (#3 position).
1. Gently press the FILM-REWIND BUTTON (21) by using a pointed object to start the autofilm rewind. 2. Wait for the film to completely rewind into the film cassette.
27
