Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Text excerpt from page 16 (click to view)
16
ENGLISH
C
2
Press the Razor Head Release Button and remove Razor Head Assembly from the razor unit.
C
3 4
Brush the inside of the razor housing and Razor Head Assembly. Turn Razor Head Assembly over so that underside is exposed. Turn wheel of frame counterclockwise. Remove the frame and brush clean.
C C
5 6 7
Remove and clean one cutter and comb at a time. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs it could take several weeks before optimal shaving performance is restored. 8 Separate the cutter from the comb. Only brush the cutter in an upward motion. Use the short bristled side of the brush.
C C
9
10 Brush the slots of the comb. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid
