WHIRLPOOL 6ET18ZKXAW01
Owner's Manual

Removing
To 1. 2. 3. 4.

the crispers

and crisper

cover

remove the crispers: Slide the crisper straight out to the stop. Lift the front. Slide out the rest of the way. Replace in reverse order.

To remove the cover: 1. Push up glass insert from the bottom, then slide it out with both hands. 2. Lift front of cover frame. 3. Pull cover frame up and out. 4. Remove metal cover support. To replace the cover: 1. Replace metal cover support on wall supports in front section of cabinet. 2. Fit back corner of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support. 3. Slide back of glass insert into cover frame. Then lower front to level position.

Remove the glass insert. Lift front of cover frame, then the back.

Removing
To 1. 2. 3. remove Lift front Lift back Replace

the freezer

shelf

the shelf: of shelf slightly. of shelf off supports. in reverse order.

Using

the

ice cube

trays

If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get. To remove ice: 1. Hold tray at both ends. 2. Twist slightly.

10