I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 9 (click to view)
Adjusting
the refrigerator
shelves
Adjust the refrigerator shelves to match the way you use your refrigerator. To remove the shelves: 1. Remove items from the shelf. 2. Slide shelf straight out to the stop. 3. Lift back of shelf over stop. 4. Slide shelf out the rest of the way. To replace the shelves: 1. Slide back of shelf into shelf track in wall of cabinet. 2. Guide front of shelf into shelf track. 3. Slide shelf in all the way.
Removing
the crispers
and cover
Lift cover front, then the back.
To remove the crispers: 1. Slide crispers straight out to the stop. 2. Lift the front. 3. Slide out the rest of the way. 4. Replace in reverse order. To remove the cover: 1. Lift cover front and remove the cover support. 2. Lift cover up and slide out. To replace the cover: 1. Fit cover tabs into lowest cabinet slots and push in. Lower the front retainers into place. 2. Inset-t cover support (with the long tab toward the front) into the groove on the underside of the cover. NOTE: If the support needs adjustment, turn base clockwise to raise or counterI clockwise to lower.
