This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 12 (click to view)
REMOVING THE MEAT DRAWER
AND COVER
(on some models)
To remove the meat drawer: 1. Slide meat drawer out to the stop. 2. Lift front of meat drawer. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order.
Style 1
To remove the cover: 1. Remove meat drawer. 2. Push cover back to release rear clips from shelf. 3. Tilt cover up at front. 4. Pull cover forward and out. To replace the cover: 1. Fit notches and clips on underside of cover over rear and center cross bars on shelf. 2. Lower cover into place. 3. Pull cover forward to secure rear clips onto shelf. 4. Replace meat drawer.
Style 1
Style 2
To remove the cover: 1. Remove meat drawer. 2. Take the half width cover with both hands, lift up the shelf side resting on the side wall of the refrigerator. 3. Turn the cover toward the opposite side wall. 4. Tilt the cover up at front, then tilt cover up at back until rear hook is out of the center shelf support and pull cover toward you. To replace the cover: 1. Guide the rear cover hooks into the slot of the center support. 2. Tilt the front of the cover up until rear hook drops into slot. 3. Rest cover on side wall. 4. Make sure shelf is firmly supported. 12
