PHILIPS 9195XL/41
Owner's Manual

22

ENGLISH

ENGLISH

23

Cleaning

C � The tap symbol on the back of the razor
� � � � indicates that the razor can be rinsed under running tap water. Regular cleaning guarantees better shaving results. Always switch Razor OFF and remove from charging stand before cleaning. Never clean, remove or replace head assembly while motor is on. Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs. Do not use razor if combs are damaged or broken. Facial injury may occur. Unplug the charging stand. The charging stand may be wiped clean using a damp cloth. The faucet symbol will start blinking after each shave to remind you that the razor needs to be cleaned.

1

Always turn razor OFF, unplug from outlet and remove cord from razor or charging stand before cleaning. Press the Razor Head Release Button, flip open the Razor Head Assembly.

C

2

C

3

Clean inside razor heads and hair chamber by running under hot water.

� �

C

4

Clean outside of Razor Head Assembly by running under hot water. Close the Razor Head Assembly and shake off excess water. Open Razor Head assembly again and leave open to air dry.

C

1

5

Cleaning: Razor Heads
The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. � Regular cleaning guarantees better shaving results.

C

6

NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads.

C

7

If the shaving unit becomes detached from the shaver, you can easily reattach it.