|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
 ;
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
;
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
N
C
INSTALLATION LOCATION
The cooker has type �Y� overheating protection so that it can be installed in a cabinet. The kitchen furniture near the sides of the cooker should be made of heat-resistant material.
AMENDED INSTRUCTIONS ANTI-TILT BRACKET
This cooker must not be used until it has been fastened to the anti-tilt bracket. Attaching the anti-tilt bracket: x After you have located where the cooker is to be positioned mark, on the wall, the place where the 2 screws of the anti-tilt bracket have to be fitted. Please follow the dimensions given in the drawing below. x Make two holes of diameter ø 8 mm on the wall and insert the plastic plugs. x Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in one slot of the cooker back. x Attach the anti-tilt brachet tightly. x Push the cooker against the wall so that the anti-tilt bracket is fully inserted in one slot of the cooker back.
Only for DENMARK For 850 mm high cookers, an additional base can be ordered separately which can be installed under the cooker itself, thus bringing the overall height to 900 mm.
Cookers with plinth (H = 900 mm) Cookers without plinth (H = 850 mm)
A = 130 mm A = 80 mm
124
M
124
Y
|
|
|
> |
|
