|
|
|
Who's Online
There currently are 5969 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
helpful manual.good service.Quick response.will use again
 ;
Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
;
I was searching for this manual at last i got it from this web
;
What can i say but i would have been lost without your support.
Thank You!
;
Très satisfait ! envoi rapide, Grand catalogue disponible. Many thanks !
DEHUMIDIFIER USE
Setting the Controls (Control types 1 and 2 only)
Starting/Stopping the Dehumidifier
NOTE: Before turning dehumidifier on, be sure that the bucket is properly inserted into dehumidifier and that the bucket is empty.
WARNING
Control Type 1
NOTE: Minimum operating temperature is 65ºF (18ºC).
A
B
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
1. Plug into a grounded 3 prong outlet. 2. To turn on dehumidifier, turn MOISTURE CONTROL clockwise. NOTE: If the Empty or Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket.
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room.
3. To turn off dehumidifier, turn MOISTURE CONTROL counterclockwise to OFF.
Empty or Adjust Bucket Light Control Type 2
NOTE: Minimum operating temperature is 55ºF (13ºC). If this light is on, the dehumidifier is not running. This light indicates that you need to check: s If the bucket is full, empty and replace bucket.
s
A
B
If the bucket is not in position, remove the bucket and replace. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.
Fan Speed (Control Type 2 models only)
The Fan Speed controls fan operation. s High�for faster moisture removal
s
Low�for slower moisture removal
Moisture Control
C
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room. C. Selects fan speed.
The Moisture Control controls the amount of moisture in the room. Turn the control knob clockwise for more drying. Turn control knob counterclockwise for less drying. Turn control knob to �dry� to maintain average humidity conditions. NOTE: For the first few days of use, turn the MOISTURE CONTROL clockwise to CONTINUOUS RUN to remove extra moisture from the furnishings as well as the room air.
4
|
|
|
> |
|
