Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
The manual was properly scanned and perfectly readable. The only small problem is that I couldn't use my dear Ctrl + F to find a word I needed.
Text excerpt from page 7 (click to view)
MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, switch off the appliance, disconnect the mains plug. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues.
If the spray nozzles become clogged with food residues (clean the spray arms as follows). 1. Unscrew the securing wing-nuts. 2. Remove the spray arms. 3. Clean them under running water. 4. Remount the spray arms and tighten the nuts. Note: Do not interchange the upper and lower spray arms. The spray jets must point upwards.
Cleaning the soil filter: If necessary, the filter can be cleaned after each wash programme as follows: 1. Remove the lower rack. 2. Release and pull out the filter. Separate the fine filter from the coarse filter. 3. Clean all the components. 4. Reassemble and reposition.
