|
There are currently no product reviews.
 ;
Very good copy in a 54 pages PDF archive. This is my sixth purchase here. :)
;
Another excellent buy! File too clear and explanatory.
 ;
A manual hard to find. It was very helpful to restore my device.
;
I am very grateful for this manual. Without it could not repair my receiver.
;
excellent work as always you do cheap, fast net and clean. you do an incredible service......thanks!
IMAGE FUSING
1 August 1996
7.3 FUSING ENTRANCE GUIDE SHIFT MECHANISM
[B]
[C]
[A]
A193D539.wmf
The entrance guide [A] for this machine has two holes on the rear side of the entrance guide to adjust for thick or thin paper. Normally, the upper screw hole [B] is used. For thin paper, move the entrance guide up by securing it with screw hole [C]. This slightly lengthens the paper path, which prevents the paper from creasing in the fusing unit. For thick paper, move the entrance guide down (use the lower screw hole). This is because the lower setting allows more direct access to the gap between the hot and pressure rollers. This prevents thick paper from buckling against the hot roller, which can cause blurring at the leading edge of the copy. Also, thick paper does not bend as easily, and is therefore less prone to creasing.
2-60
|
