|
|
|
Who's Online
There currently are 5199 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
There was no problem at all.After paying i had to wait only a few hours,than i could
download the manual in best pdf-quality.
Thank You !
 ;
I found this service manual to be complete in every detail except for troubleshooting charts. It would be helpful if it had a set of troubleshooting charts; however it is a very good manual otherwise and for the price it is very well worth it.
;
Complete manual included schematics layouts and alignment procedure, clear to read and magnify, extremely pleased with manual and owner manual . com's service
;
perfect, i am very satisfait for the réception of the sansui r-5l service manual, thank you very much
;
Thank you, this is a rare document. Few others have it, but they charge way more for a download.
Great deal (even if you have to wait a few hours to get it).
10 May 1996
COPY IMAGE ADJUSTMENT
Example:
1. The C-4 chart�s vertical lines do not overlap properly. On the right side of the chart, the yellow line is to the left of the black line and the cyan line is to the right of the black line. The yellow line�s edge is the most distant edge from the black line. These conditions are used to determine what the new values should be. The new value is located in the bottom row, to the left of the current value�s column. For the right side of the chart, the machine�s current red correction value is 6 (4-932-2), and the blue correction value is 5 (4-932-4). Therefore, the current value in the chart is 65. The new value (bottom row to the left) is 56. 2. On the left side of the chart, the cyan line is to the left of the black line and the yellow line is to the right of the black line. The edges of the yellow and cyan lines deviate evenly from the black line. These conditions are used to determine what the new values should be. The new value is located in the middle row, to the right of the current value�s column. For the left side of the chart, the machine�s current red correction value is 6 (4-932-1), and the blue correction value is 4 (4-932-3). Therefore, the current value in the chart is 64. The new value (middle row to the right) is 73.
6-29
Replacement Adjustment
|
|
|
> |
|
