Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 82 (click to view)
Adjusting the Audio Level 4
Turn the AUDIO LEVEL CH1 control at the bottom of the front panel to adjust the input volume so that the audio level display appears as shown below. �When the input volume is normal, the audio level display turns ON up to the seventh of the eight level display bars from the left. �When the rightmost (0 dB) turns asterisk (E) mark, the input volume is excessive. Adjust the level so that the display bar does not turn E mark.
-40 -30 -25 -20 -15 -10 -5 0
E
When the optimal level cannot be set The maximum attenuation of the AUDIO LEVEL CH1 control at the bottom of the front panel is about 20 dB. When the optimal level cannot be set within this range, adjust the level using the AUDIO LEVEL CH1 control on the side panel. Using the AUDIO LEVEL CH1 controls at the bottom of the front panel and on the side panel Normally, the control at the bottom of the front panel is turned completely to the right and the recording level is adjusted using the control on the side panel. The control at the bottom of the front panel is used to throttle the level when the input level increases suddenly during recording.
