JVC AV-14F16
Owner's Manual

Using the TV�s menus

MANUAL CH PRESET
You can manually preset desired TV channels to desired channels. 1 Press MENU T to display the �MENU 3� menu, then select �MANUAL CH PRESET�.
MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH SELECT BY OPERATE BY -+ EXIT BY D SPLA I Y

If the picture is not clear: Fine-tune the TV channel.
1 Press MENU t to select �FINE�.
MANUAL FINE SKIP SOUND SYSTEM EXIT

NO B/G

SELECT BY PR 3 VL PROGRAM BY -+ EXIT BY FINE BY VOL-+ D SPLA I Y

2 Hold VOLUME m down to fine-tune the TV channel so that the best image is displayed on screen. �>� or �<� indicates that the TV is finetuning the TV channel.

2 Press MENU M. The sub-menu is displayed.
MANUAL FINE SKIP SOUND SYSTEM EXIT NO B/G

If the sound is not clear:
1 Press MENU t to select �SOUND SYSTEM�.
MANUAL FINE SKIP SOUND SYSTEM EXIT

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY SEARCH BY VOL-+ D SPLA I Y

� The channel number is displayed as a PR number. For example, channel 1 will be displayed as PR 1. However, the AV channel will be displayed as AV.

NO M

SELECT BY PR 3 VL PROGRAM BY -+ EXIT BY CHANGE BY VOL-+ D SPLA I Y

3 Press MENU M to select the channel number. 4 Press VOLUME M to start searching for the TV channel. �> >� or �< <� is displayed on the > < screen. When the TV finds a TV channel, the �> >� or �< <� display goes out, > < and the TV channel is preset to the currently selected channel number.
� If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the TV channel you want to preset. � To stop the MANUAL CH PRESET function, press any button other than the VOLUME m button.

2 Press VOLUME m to select the appropriate sound system. � For the sound systems in each country or region, refer to the table �Broadcasting systems� on page 19.

5 Press MENU T to select �MANUAL�. 6 Repeat steps 3 to 5 if you want to preset another TV channel to a channel.

14