|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
 ;
Excellent transaction - clean document received - Thanks a lot
 ;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
 ;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
AV-65WP74
2.7.7 SCREEN ASS'Y � Take out the SPEAKER GRILLE. � Take out the FRONT CONTROL BOX. (1) Remove the 4 screws [ I ] attaching the FRONT BRACKET. (2) Remove 10 screws [ J ] from rear side. (3) Take out the connector [ CN00Z ]. (4) Take out the SCREEN ASS'Y. NOTE : � Please place the SCREEN ASS'Y on a flat table without fail. � Because of the large size, at least two parsons are recommended for removal and reassemble. � Use core not to scratch the screen during work. � During assembly, be sure to engage the left and right tabs with the cabinet mounting positions. � When than sporting the SCREEN ASS'Y, avoid grasping the top of the screen panel, instead grasp the left and right areas.
SCREEN ASS'Y FRONT BRACKET
I
CN00Z
J
Fig.3 2.7.8 MIRROR � Take out the SPEAKER GRILLE. � Take out the FRONT CONTROL BOX. � Take out the SCREEN ASS'Y. (1) Remove 10 screws [ K ] attaching the mirror brackets of the upper, left and right side. (2) Raise slightly to disengage of the mirror from the bottom bracket.(If necessary, loosen the screws attaching the bottom bracket) (3) Take out the MIRROR. NOTE : � The MIRROR is front-coated. Do not touch the front of the MIRROR. � At least 2 persons are recommended for removable and reassemble.
MIRROR BRACKET BRACKET
K
MIRROR
Fig.4
(No.52096)1-15
|
|
 |
> |
|