I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
Very pleased with the quality of the scan. No complaints whatsoever.
Text excerpt from page 25 (click to view)
AV-G2171
STATIC CONVERGENCE ADJUSTMENT
1. Input a crosshatch signal. 2. Using 4-pole convergence magnets, overlap the red and blue lines in the center of the screen (Fig.1) and turn them to magenta (red/blue).
(FRONT VIEW)
3. Using 6-pole convergence magnets, overlap the magenta(red/blue) and green lines in the center of the screen and turn them to white. 4. Repeat 2 and 3 above, and make best convergence. Fig.1
(FRONT VIEW)
DYNAMIC CONVERGENCE ADJUSTMENT
1. Move the deflection yoke up and down and overlap the lines in the periphery. (Fig. 2)
BLUE
RED
GREEN BLUE
RED GREEN BLUE
2. Move the deflection yoke left to right and overlap the lines in the periphery. (Fig. 3) 3. Repeat 1 and 2 above, and make best convergence.
GREEN RED
BLUE
GREEN
RED
Fig.2
�
After adjustment, fix the wedge at the original position. Fasten the retainer screw of the deflection yoke. Fix the 6 magnets with glue.
(FRONT VIEW) GREEN RED BLUE GREEN BLUE RED RED GREEN BLUE
