|
|
|
Who's Online
There currently are 5993 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
5
6
7
8
7. DISASSEMBLY
- Removing the Monitor Assy (Fig.1) Remove the Case. Case
A
1
Remove the four screws.
1
1
Detach two hooks on the tip of a white arrow. Disconnect the cable and then remove the Monitor Assy.
Fig.1
1
Monitor Assy
1
- Removing the LCD Assy (Fig.2) Disconnect the two Cables.
LCD Assy
Cable
B
1
Remove the four screws.
1
1
Detach two Hooks on the tip of a white arrow. Lift the LCD Assy forward, detach lower three hooks and then remove the LCD Assy.
1
Hook
1
Fig.2
C
- Removing the Monitor PCB and Invertor PCB(Fig.3) Disconnect the Cable(1).
Holder
3
Invertor PCB
3 4 1
1 2
Remove the two screws.
Straighten the tab at location indicated.
4
Disconnect the Cable(2) and then remove the Invertor PCB.
4 3 4
Remove the two screws and then remove the Holder. Remove the four screws. Cable(3)
Cable(1)
4
2
D
1
Fig.3
Moniter PCB
Cable(1)
Cable(2)
Disconnect the Cable(3) and then remove the Monitor PCB.
Knob Unit
- Removing the Keyboard Unit (Fig.4,5) Fig.4 Remove the Knob Unit.(Fig.4)
E
1
Remove the three screws.(Fig.5)
1 1
1
Fig.5
Disconnect the Cable and then remove the Keyboard Unit.(Fig.5) Cable Keyboard Unit
F
AVH-P4050DVD/XNCN5
5 6
7
8
63
|
|
|
> |
|
