I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
Very pleased with the quality of the scan. No complaints whatsoever.
Text excerpt from page 165 (click to view)
1
2
3
4
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
7.1.1 DISASSEMBLY
- Removing the Grille Assy (Fig.1)
1
Remove the two screws and then remove the Holder. Disconnect the connector. Remove the two screws and then remove the Grille Assy.
5
5
2
B
3 4 3 3
- Removing the Case
3 4 5
C
Remove the five screws.(Fig.1)
Remove the screw.(Fig.1)
Remove the two screws and then remove the Case.(Fig.1)
3 2
1
1
3 2
Note) Inside the product there is a flexible substrate that connects the Case and the Bracket. Be very careful and do not give it a strong pull when removing the Case, otherwise it may be torn.
Case
Holder
Grille Assy
Fig.1
6
D
Remove the four screws. (Fig.2)
Disconnect the connector and then remove the Bracket. (Fig.2) Remove the Case.(Fig.1)
