I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
It is an very good and clear scanned service manual.
very recommended.
Text excerpt from page 69 (click to view)
AVX-P7700W
- Removing the Mother PCB
1. Remove the screw M to take off the holder. 2. Remove the screw N. 3. Unsolder the tuner PCB the catches. 4. Straighten the nine catches marked with arrow to remove the mother PCB.
M
Holder
Mother PCB
Solder
N
- Precaution in assembling the drive mechanism
1. Insert the drive mechanism in the right and left rail units equally to the both side. If inserted unequally, the drive mechanism will not operate normally. 2. The screw marked with arrow is for preventing the drive mechanism from dropping. Be sure to fasten the screw to prevent danger in case of car crash. Drop prevention screw OK Drive Mechanism NG
