|
|
|
Who's Online
There currently are 5636 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
3gb05376.fm Page 64 Tuesday, July 2, 2002 3:31 PM
REMOVING THE FILTER
We recommend that you check and clean the filter regularly, at least two or three times a year.
Especially:
� When the appliance does not drain or spin properly � If the pump is blocked by a foreign body (e.g. buttons, coins or safety pins) IMPORTANT: make sure the water has had time to cool before draining the appliance. 1. Switch off the appliance and unplug it. 2. Open the filter cover. Open the filter cover with the help of the coloured insert from the detergent container. 3. Place a container beneath it. 4. Open the filter but do not withdraw it completely. Slowly turn the handle anticlockwise until the water drains out. 5. Wait until all the water has drained off. 6. Now unscrew the filter completely and remove it. 7. Clean the filter and the filter chamber. 8. Check that the pump rotor moves freely. 9. Insert the filter with the guide pin upwards and screw it in clockwise to the stop (handle horizontal). 10. Pour about 1 litre of water into the detergent drawer to reactivate the Eco system. Check that the foreign body trap is seated properly and tightly in place. 11. Fold the cover up and lock it. 12. Reinsert the plug in the socket. 13. Select a programme and start it.
64
Black process 45.0° 100.0 LPI
|
|
|
> |
|
