Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
Text excerpt from page 30 (click to view)
7gb14811.fm Page 12 Tuesday, November 5, 2002 12:58 PM
Adjust the feet Small unevennesses in the floor can be compensated for by screwing the four appliance feet up or down (never use pieces of wood, cardboard or similar material): 1.The washing machine must be installed horizontally in width and depth. Use a spirit level. 2.Loosen the locknut clockwise using the wrench provided. 3.Adjust the height of the foot by hand. 4.Tighten the locknut anti-clockwise to the washing machine. If the appliance is to be installed on a wooden floor, distribute the weight by placing it on a 70 x 80 cm sheet of plywood at least 3 cm in thickness. Screw the plywood sheet to the floor.
