Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 2 (click to view)
Install the Camera Cover. 1
Put the camera cover over the main unit and hook the 2 tabs of the camera cover to each hole in the plate.
Hole
2
Fasten the camera cover by turning it to the right.
3
Attach the 2 caps to lock the cover to the mounting bracket of the camera.
Note
Tab Confirm that the 2 tabs are fit to each hole in the plate by watching through the openings. After the installation, dust, dirt or insects may get into the camera cover. Remove them by regularly removing the camera cover.
I Removing the Camera Cover Insert a flat head screw driver into the groove and remove the caps, this will unlock the camera cover from the mounting bracket of the camera. Groove
I Wiring Without Making Holes in the Ceiling Remove the notch from the camera cover and pass the wires through the hole.
Dimension (WHD) Specifications About 169 mm (6 5/8 inches) � 154 mm (6 1/16 inches) � 169 mm (6 5/8 inches)