Complete service manual in very good scanning quality with all schematic and PWB graphics as well as assembly & maintenance instructions. A slight drawback is that the rastering of the PWB graphics sometimes makes it a bit difficult to follow fine traces, but no showstopper.
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site. Thank you very much
Text excerpt from page 23 (click to view)
Section 3 Service Overview
3-1. Cleaning
Clean the filter at the inside of the front panel periodically because it apt to catch dust. It is recommended to replace the filter every five years. � Filter (3U) : 2-139-072-03 c If the BDX-E1000 is kept on operating with too dusty of the filter, the temperature inside the unit getting rise. This may cause a fire. 1. Turn the power off. 2. Loosen the locking screw on the front panel using a flat-blade screwdriver. 3. Pull the locking screw toward you and open the front panel.
Tape
6. Fasten the filter to the tape.
Front panel
Tape
Filter
Front panel
Locking screw
4. Peel the filter away from the tape. 5. Clean the dust on the filter using a vacuum cleaner. n If the filter is too much dusty, it is recommended to wash it. When washing the filter, be sure to dry it well.
