CASIO BG152L-2V
Owner's Manual

Module No. 2177
GENERAL GUIDE
� � � � �

2177-1

Press C to change from mode to mode. Pressing L in any mode illuminates the display for about 3 seconds. If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen. If you do not perform any operation for a few minutes in Day Counter Mode and Telememo Mode, the watch automatically reverts to the normal timekeeping screen. When making settings (except Easy Timer setting), note that you can scroll only forward, you cannot scroll back. This means that if you go past the setting you want, you must scroll through all of the available settings again until the one you want reappears. Timekeeping Mode Day Counter Mode Telememo Mode Easy Timer Mode Alarm Mode

Press C.

TIMEKEEPING MODE
� Press B to toggle the display between the day of the week and month, as shown below.
Day of week Day Month

DAY COUNTER MODE
The Day Counter Mode lets you count the number of days from the Timekeeping Mode�s current date to a specific target date. There are ten day counters, each identified by a counter number. You can assign text titles up to eight characters long to each of the 10 Day Counters. Whenever the date specified by any one of the day counters matches the date of the Timekeeping Mode (regardless of the day counter�s year setting), the DAYS indicator flashes on the Timekeeping Mode. In the Day Counter Mode, the DAYS indicator flashes on the screen of the particular day counter whose date matches the date of the Timekeeping Mode. The initial default date for all Day Counters is January 1, 2001. The page number on the display when you exit the Day Counter Mode appears first the next time you enter the Day Counter Mode.
Page number Mode indicator Year Text DAYS indicator
Alternate at the 1-second interval.

Press B.

Seconds Hour : Minutes DST on indicator

Target date Month Day

� Press D to toggle the display between the 12-hour and 24-hour timekeeping. � With 12-hour timekeeping, times between midnight and noon are indicated by A (am), while times between noon and midnight are indicated by P (pm). � The A and P indicators do not appear when you are using 24-hour timekeeping.

To set the time and date
1. While in the Timekeeping Mode, hold down A until the seconds digits flash on the display, indicating the setting screen. 2. Press C to move the flashing in the sequence shown below. Seconds Day Month DST Year Hour Minutes
Numbers of days

Recalling Day Counter Data
In the Day Counter Mode, press D(+) or B(�) to scroll through the day counters.

To set the target date
3. While the seconds setting is selected (flashing), press D to reset it to 00. If you press D while the seconds setting is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged. � While the DST� setting is selected (DST on indicator is flashing), press D to toggle it on (ON) and off (OF). 4. While any other setting is selected (flashing), press D to increase it. Holding down D changes the setting at high speed. 5. After you make the settings you want, press A to exit the setting screen. � The day of the week is automatically set in accordance with the date. � The date can be set within the range of January 1, 2000 to December 31, 2039. � The watch�s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after the replacement of the watch�s battery. � Daylight Saving Time (DST), which is also sometimes called �summer time� advances the time for one hour, as is the custom in some areas during the summer. Remember that not all countries or even local areas use Daylight Saving Time. 1. In the Day Counter Mode, press D(+) or B(�) to display the number of the counter you want to set. 2. Hold down A until the flashing cursor appears in the text area. This indicates the input screen. 3. Press C to move the flashing in the sequence shown below. � Holding down C to move the flashing at high speed.
1st digit Day

Press C.
Month

8th digit Year

4. While the cursor is in the text area, use C to scroll through characters at the current cursor position. Characters scroll in the sequence shown below. Holding down C scrolls at high speed. Press C. (Space) A to Z 0 to 9 . (Period) - (Hyphen) 5. While the cursor is in the date area, press C to scroll through digits at the current cursor position. Holding down C scrolls at high speed. � Press D and B at the same time. The message �CLR� appears in the display. The characters in the text area is cleared and today�s date is set as the target date. You can then make any changes in the date you want. 6. After you make the settings you want, press A to exit the input screen. � The date can be set within the range of January 1, 1940 to December 31, 2039. � The text area display can show only three characters at a time. Longer text scrolls continuously from right to left. The symbol � � indicates that the character to the left is the last, and the character to the right is first.

ABOUT THE BACKLIGHT
� Press L to illuminate the display for about three seconds. � The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use. � Frequent use of the backlight shortens the battery life. � The watch emits an audible sound whenever the display is illuminated. This does not indicate malfunction of the watch. � The illumination provided by the backlight may be hard to see when viewed under direct sunlight. � The backlight automatically turns off whenever an alarm sounds.