|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Best Service! Very fast and easy to handle. Fast Download an you can come back every day to download again
;
Very good quality, no parts are missing and everthing is readable.
Thank you very much. :-)
;
This manual is all I need to check and repair my equipment. Thank you....
 ;
sorry for my english...the service given by O.M.com is perfect for content and codition...!!!
thank's a lot!!!
best greetings
;
This manual is all I need to check and repair my equipment. Thank you....
2-4-1. IF-715 Board
In the case of one power-cooling-fan Removal
3Harnesses to HDD units
1. Turn off the power and wait for more than 30 seconds. 2. Remove the upper lid. (Refer to Section 1-6.) 3. Disconnect all harnesses on the IF-715 board. 1 Free the six harnesses of fans 1 to 6 from clampers 1 and remove them. 2 Disconnect the POWER IN harness. 3 Disconnect the 12 harnesses which are connected to the HDD units. Free these harnesses from clampers 3. 4 Disconnect the harness which is connected to the FP-104 board. 5 Disconnect the harness of power-coolingfan.
2POWER IN harness
4Harness to FP-104 board
1Harnesses of fans
1Clampers
IF-715 board 3Clampers 5Harness of power-cooling-fan
4. Unscrew the four screws. 5. Remove the IF-715 board with paying attention to avoid catching on the harness. Installation Install in the reverse order of removal. However, for connection of harnesses of fans 1 to 6, refer to installation procedure 8 in �2-3. Replacement of Power Supply Unit� and connect it properly.
PWH3 x 5
PWH3 x 5
IF-715 board
2-28 (E)
BKNW-116
|
|
|
> |
|
|
Parse Time: 0.148 - Number of Queries: 125 - Query Time: 0.034
