Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
Text excerpt from page 5 (click to view)
Connecting to electricity
The oven is designed to be connected to 240 V - 50 Hz electricity supply. The oven has an easily accessible terminal block which is market as follows. Letter L Live terminal Letter N Neutral terminal Earth The cable used (of the type H05 RR-F) must have a min. cross section of 1.5 mm2. In order to connect it to the oven it is necessary to remove the hatch at the back of the oven to reach the terminal block. For direct connection to the mains supply a two pole swich whith a minimum rating of 13 A and a minimum distance of 3 mm between its contacts must be fitted between the supply and appliance. This swich must not break the yellow/green earth cable at any point. The manufacturer disclaims any responsibility should these safety instructions not be carried out.
The appliance must be earthed
Important After installation and connecting, the cable must be placed so that is cannot at any point reach a temperature more than 50°C above the ambient temperature. Before the appliance is connected check that: the main fuse and the domestic installation can support the load; the power supply is properly earthed; the double pole swich used to connect the appliance to the supply is easily accessible after installation.
