I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
Very well done!!!!! congratulations. It was a bit longer than usual the wiating time even if it was on time (in 24 hours).
Text excerpt from page 7 (click to view)
Using cycle
the
Perm.
Press /Reg.
Use the Pen. Press/Reg. cycle to dry permanent press and some synthetic fabrics. Your dryer senses the dryness of the load and automatically shuts off when the selected dryness is reached. For the first few loads: 1. Set the Cycle Control Knob to point to the asterisk (a) in your Perm. Press/Reg. cycle. 2. Feel the dried items when the dryer stops. If the load is drier than you Ilke, select LESS dry the next time you dry a similar load. . If the load is not as dry as you like, complete drying using the Timed Drying cycle. Select MORE dry the next time you dry a similar load. The Cycle Control Knob will not move until the load is almost dry or cool-down is reached. After cool-down is complete, the Cycle Control Knob automatically moves to an OFF area and tumbling stops.
l
Using
the Timed
Drying
cycle
Use the Timed Drying cycle to complete drying if some items are damp after Perm. Press/Reg. cycle drying. Timed Drying is also useful to dry delicate items that require a short drying time, or large bulky items. 1. Turn the Cycle Control Knob to the number of minutes you want in the Timed Drying cycle. 2. For a damp dry, turn the Cycle Control Knob to 30 minutes or less. The last few minutes of this cycle are without heat to help make the load easier to handle.