This scanned manual is well done in that most all the pages except for one is straight and clear- the way I would do them. One page was upside down but that happens. For the money that is charged on this site you get a pretty good deal. Now with complex repairs, I still prefer to us paper manuals which I have to buy at stereomanuals but the one I got here was much less than the $45 he was charging but this is a larger than normal manual for three different units. I am a picky manual user because I have used original manuals from Sony and Teac.
Acurate informations inside the SM and I could repair my old Sansui SC-3330 without any problems. Thanks.
Text excerpt from page 6 (click to view)
1.4
How to service, English
Troubleshooting
Before troubleshooting is started Please ask the customer to demonstrate or explain the fault. Check that The product is set for the correct option All leads are connected correctly Mains voltage is applied All external sources are connected correctly and the product setup is correct Set up for test Connect the following products to establish the setup for test, The BeoVision 4, a BeoSystem 1 and a DVD player.
BeoVision 4
DVD player BeoSystem 1
�����
�����
Default settings when using the Fault flow chart - Press TV on Beo4 - Select a TV channel with picture and sound Service mode on PDP If BeoVision 4 is connected to BeoSystem 1 please unplug the SERIAL connector (RS232). Otherwise it is not possible to enter the service mode. Switch off the PDP by pressing the A button. Be sure that there is no light coming from the LED. Wait 10 seconds. Switch on the PDP. The LED should be green.
