|
|
|
Who's Online
There currently are 5980 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
 ;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
3. Place one end of tray center over carriage bolt.
Attach support legs
1. Determine the correct slots on the tray side from the type of exterior construction of the building. Thin wall construction (vinyl, wood, etc.)
1
1. 1st and 2nd slots
Thick wall construction (brick) 1
4. Then place flat washer, lock washer and hex nut. NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed. 1 2 3 4
5
1. Hex nut 2. Lock washer 3. Flat washer 1. 2nd and 3rd slots 4. Tray center 5. Carriage bolt
5. Insert second carriage bolt through tray side and attach other end of support leg. NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.
2. Insert carriage bolt up through slot on tray-frame side and support leg.
1 2 3
4
1. Hex nut 2. Lock washer
3. Flat washer 4. Carriage bolt
6. Install support leg on other side.
6
|
|
|
> |
|
