Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 339 (click to view)
Types of trouble and how to correct trouble In the playback mode
Symptom
The picture does not appear on the screen when playing back a tape.*1) The tape does not move when a video control button is pressed. The playback button does not work. There are horizontal lines on the picture. The playback picture is not clear or does not appear.
Cause and/or Corrective Action � The tape is recorded in the Hi8 system.
/Standard 8 mm
� The POWER switch is set to MEMORY, CAMERA or OFF (CHG).*2) c Set it to VCR/PLAYER *2) (p. 45). � The cassette has run out of tape. c Rewind the tape (p. 45). � The television�s video channel is not adjusted correctly. c Adjust it *3) (p. 51). � EDIT is set to ON in the menu settings. c Set it to OFF *3) (p. 214). � The video head may be dirty. c Clean the heads using the Sony V8-25CLD cleaning cassette (optional) (p. 248). � The stereo tape is played back with HiFi SOUND set to 2 in the menu settings.*4) c Set it to STEREO (p. 214). � The volume is turned to minimum. c Press VOLUME + (p. 45). � AUDIO MIX is set to the ST2 side in the menu settings.*4)
No sound or only a low sound is heard when playing back a tape.
The date search does not work correctly.*5) The picture which is recorded in the Digital8 system is not played back.*6) The tape which is recorded in the Hi8 /standard 8 mm system is not played back correctly.*6)
c Adjust AUDIO MIX (p. 214). � The tape has a blank portion between recorded portions (p. 90). � PB MODE is set to / in the menu settings. c Set it to AUTO (p. 215). c Set PB MODE to / in the menu settings (p. 215).
*1) *2) Modes on the POWER switch vary depending on models (p. 16). *3) *4) *5) *6)
