perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 58 (click to view)
EN
Problem The icon is not blinking when the handset is placed on the base
Troubleshooting Troubleshooting of the phone
Causes � Bad battery contact � Dirty contact � Battery is full No dialling tone � No power Solution � Move the handset slightly � Clean the battery contact with a cloth moistened with alcohol � No need to charge � Check the connections. Reset the phone: unplug and plug back in the mains � Charge the batteries for at least 24 hours � Move closer to the base station � Use the line cable provided � Connect the line adaptor (when needed) to the line cord � Move closer to the base station � Move the base station at least one metre away from any electrical appliances � Register the handset to the base station � Move closer to the base station
� Batteries are empty � You are too far from the base station � Wrong line cable � Line adaptor (when needed) is not connected to the line cord Poor audio quality � You are too far from the base station � The base station is too close to electrical appliances, reinforced concrete walls or metal doorframes The icon is blinking � Handset is not registered to the base station � The handset is too far from the base station
