The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Text excerpt from page 13 (click to view)
CDX-454RF/454XRF
3-10. RF BOARD
3 two screws (PS2 � 4) 4 RF board 3 two screws (PS2 � 4)
2 Remove four solders of the LSW board leads and spindle motor leads (M102).
2 Remove two solders of the sled motor leads (M101).
1 OP flexible board (CN102).
3-11. SLED MOTOR ASSY (251) (M101), OPTICAL PICK-UP (KSS-720A)
1 two precision screws (P2 � 3)
2 sled motor assy (251) (M101)
OP flexible board
4 Turn shaft (feed) assy in the direction of the arrow, then remove it.
adhesive sheet
optical pick-up Note: After connecting OP flexible board, fix it with adhesive sheet to optical pick-up.
3 optical pick-up (KSS-720A)
