This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 9 (click to view)
Attaching the front panel
Detaching the front panel
You can detach the front panel of this unit to protect the unit from being stolen.
Place hole A of the front panel onto the spindle B on the unit, then lightly push the left side in. Press (SOURCE) on the unit (or insert a CD) to operate the unit.
Caution alarm
If you turn the ignition switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional amplifier and do not use the built-in amplifier, the beep sound will be deactivated.
A B
1
Press (OFF)*. CD/MD playback or radio reception stops (the key illumination and display remain on).
* If your car has no ACC (accessory) position on the ignition switch, be sure to turn the unit off by pressing (OFF) until the display disappears to avoid car battery drain.
2
Press (OPEN), then slide the front panel to the right, and gently pull out the left end of the front panel.
x
1 2
Notes � If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. � Do not drop or put excessive pressure on the front panel and its display window. � Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Tip When carrying the front panel with you, use the supplied front panel case. Note Do not put anything on the inner surface of the front panel.
