|
Who's Online
There currently are 5619 guests and 17 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
;
Very good service for get any documentation. Fast and perfect quality.
;
Excellent service manual with all the necessary info. :)
CQ-C8351N / CQ-C8301N / CQ-C7301N
1 ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB. Caution : � Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 40°C) higher. Please use a soldering iron with temperature control and adjust it to 700 ± 20°F (370 ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long. � Pb free solder will tend to splash when heated too high (about 1100°F/600°C) � This lead free solder will be used for the products after serial No. 1,000,001.
[CD DECK BLOCK] This model has no servo alignment microcomputer controls the servo circuit points because
6 DIMENSIONS
2 FEATURES
� MP3/WMA Playback from CD-R/RW � Fully Motorized Front Panel � Innovated APM (Auto Preset Memory) method � Six Preset Modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB) � SQ7 (7 Bands Sound Quality) � CD Changer Control � DVD Changer Control � Customize the Display (Customize Function) � Delightful sound space thanks to system buildup � The difference among these models� are mentioned below.
7 LASER PRODUCTS
3 REPLACEING THE FUSE
Use fuses of the same specified rating 15 amps. Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fuse, could cause fire or damage to the stereo unit.
4 MAINTENANCE
Your products is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvent.
5 NOTES
[RADIO BLOCK] Do not align the AM/FM package block. When the package block is necessary, it will be supplied already aligned at the factory. 3
|
|
|
> |
|