|
|
|
Who's Online
There currently are 5719 guests and
1 member online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
;
Very good scanning quality. All schematics are very legible. Worth every cent !
PRACTICAL SERVICE FIGURE
< TUNER SECTION >
< FM SECTION >
IHF Sensitiviy: (THD 3%) Signal to Noise Ratio: (Input 60dB) Distortion: (Input: 60dB) (Input: 120dB) Auto stop level: Stereo separation: Intermediate frequency: Less than 18dB (at 76/87.5, 83/98, 108MHz) Mono: More than 66dB Stereo: More than 65dB Less than 2% (at 98MHz) Less than 3% (at 98MHz) 28dB±8dB (at 98MHz) More than 25dB (at 98MHz) 10.7MHz
< AM/MW SECTION >
Sensitivity: (S/N 10dB) Less than 48dB (at 600/603kHz) Less than 46dB (at 1000/999kHz) Less than 44dB (at 1400/1404kHz) More than 30dB (at 600/603, 1000/999, 1400/ 1404kHz) Less than 3% (at 1000/999kHz) Less than 10% (at 1000/999kHz) Less than 60dB (at 1000/999kHz) 450kHz
Signal to Noise Ratio:
Distortion: (Input: 74dB) (Input: 75dB) Auto stop level: Intermediate frequency:
< LW SECTION > (EZ model only)
Sensitivity: (S/N 10dB) Less than 60dB (at 153kHz) Less than 56dB (at 198kHz) Less than 52dB (at 288kHz) More than 30dB (at 153/198/288kHz) Less than 3% (at 198kHz) Less than 70dB (at 198kHz)
Signal to Noise Ratio: (Input 80dB) Distortion: (Input: 80/120dB) Auto stop level:
< DECK SECTION >
Tape speed: Wow & flutter: Take-up torque: FF&REW torque: Distortion: S/N ratio: 3000Hz±60Hz Less than 0.3% (R.M.S) 30-60g-cm (FWD) 55-140g-cm Less than 5% (REC/PB, 1kHz) More than 35dB (PB, AC, DC) More than 25dB (REC/PB, AC, DC) Less than 45mV (PB, VOL MAX) More than 45dB TTA-100 TTA-602 (NORMAL) TTA-615 (HIGH POSITION)
Max Noise level: Erasing Ratio: Test tape:
31
|
|
|
> |
|
