The manual was everything that I wanted. Clearly printed and delivered in very quick time. Would certainly use again if I needed a manual in the future
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced. Thanks, I will use you again
Text excerpt from page 14 (click to view)
How to record (deck B only)
14
Since this unit is not designed for use with metal tapes, recording on metal tapes cannot be carried out.
The figure shows an example for the CT-403 or KXF-W3030
PUSH/OPEN
0
PUSH/OPEN
0
Preparation
POWER
(dB)
�
�5
0
+3
+6
(dB)
A
Insert a tape in deck B.
1
¡ TAPE
1
¡
8PAUSE ¶REC/ARM
A
TAPE
B
@ 7 #
AUTO REVERSE
@ 7 #
AUTO REVERSE
PUSH/OPEN
0
(dB)
�
�5
0
+3
+6
(dB)
: Keys or controls to be used in this operation
TAPE
B
1
¡
8PAUSE ¶REC/ARM
AUTO REVERSE
@ 7 #
1 Set up the cassette deck.
1 Select the Dolby NR mode.
DOLBY NR
(dB)
÷ Press to record with the DOLBY NR. 1 Dolby NR on 2 Dolby NR off Dolby NR on
DOLBY NR
Dolby NR off
DOLBY NR
�
�5
0
+3
+6
(dB)
Lit
Goes off
2 Select the recording mode. (CT-403/KXF-W3030 only)
REV.MODE
(dB)
�
�5
0
+3
+6
(dB)
÷ Each press switches the indication. 1 �[� :Double-side recording which stops tape after having recorded both sides. 2 ��� :Recording stops after having recorded both sides. 3 ��� :One-way recording which stops tape after having recorded a single side.
2 Select the source to be recorded. 3 Set the recording level.
1 Play a music source. 2 Enter the record-pause mode.
8PAUSE ¶REC/ARM
(dB)
÷ While pressing the PAUSEkey, press the REC/ARM key.
�
�5
0
+3
+6
(dB)
3 Adjust the recording level.
REC LEVEL
(dB)
÷ Adjust so that segments around the 0 dB segment of the peak level meter light up at times.
(dB)
�5 0 +3 +6 (dB)
�
�5
0
+3
+6
(dB)
MIN
MAX
4 Stop playing the source.
4 Start recording.
1 Play the music source from the beginning. 2 Press the ÷REC/ARM key.
Press once.
(dB)
¶REC/ARM
÷ Recording will start. ÷ The deck enters the stop mode automatically when the tape has been recorded till the end. (CT-401/KXF-W1030)
