This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
Text excerpt from page 6 (click to view)
â� Operation Details
TIMER � Use the ON timer to turn on the air conditioner at the desired time. This will give you a cooled environment, e.g. when you return from work or wake up. � When the ON timer is set, operation will start 15 minutes before the actual set time. � Use the OFF timer to stop air conditioner operation at the desired time. This can save electricity while you are going out or sleeping. � The set timer will repeat daily once it is set. � If there is a power failure, you can press the SET button to restore the previous setting once the power resumes. � If the timer is cancelled, you can restore the previous setting by pressing SET button.
HOW TO OPERATE
Timer
1
Select ON or OFF timer.
COOL
AUTO AUTO AUTO FAN
2
OFF/ON
TEMP
QUIET
Set the desired time.
MODE
1
ECONOMY
2
POWERFUL FAN SPEED SET CANCEL
3
AIR SWING
3
Con�rm the setting.
ON OFF
CANCEL
Cancel the selected timer.
TIMER RESET CLOCK
� Ensure the clock on the remote control has been set correctly. � You can set both the ON and OFF timers at the same time. � To cancel either the ON or OFF timer, press then press CANCEL .
Hints
� �
ON
or
OFF
,
Press CLOCK button for more than 10 seconds to change the time format - from AM/PM format to 24 hour format. For your convenience, you can set the air conditioner to operate automatically by using both ON and OFF timer.
Troubleshooting
� �
TIMER indicator always on. POWER indicator is blinking 15 minutes before ON timer is activated.
� Timer is activated and the setting will repeat itself daily. � The unit is determining the operation mode by sensing the room temperature. This happens when it has been set to AUTO operation mode.
