I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
GRC 1 Confirm the Subwoofer adjustment display. (Select icon as required.)
To skip an adjustment item
RC/Main unit ÷ When an adjustment item is not required to be adjusted, press the MODE key to go to the next adjustment step. GRC ÷ Select only the icons of the adjustment items which require adjustment.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Adjust the level as required.
Sub W
-20dB
To decrease To increase
ENTER
sWch
+ 1)
dB
LEVEL
To decrease
÷ The level can be adjusted between -20 and +10 dB in steps of 1 dB.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Select the "Delay Time".
Delay Time
ENTER
÷ Find the optimum delay time for the listening room by referring to �How to calculate the delay time�. � ÷ The delay time in the PRO LOGIC mode can be adjusted between 15 and 30 ms. ÷ Select the closest value to the value obtained by �How to calculate the delay time�.
If the input level is too high, set it to -6 dB to avoid sound distortion.
÷ The input level can be set to -6 dB or 0 dB. ÷ This adjustment is not available with 6ch INPUT.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Select the "Input Level". 3 Set the input level.
dB
Input Level
LEVEL
ENTER
-6dB
I N P U T @ @@ -6
Each press changes the level.
To decrease
To quit the setup operation:
GRC
Main Menu
ENTER
÷ If no key on the main unit has been pressed for about 5 seconds, the display on the main unit disappears and it returns to the status before the setup mode was entered. ÷ The display on the GRC disappears if no key on the GRC has been pressed for about 10 seconds.
