perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
GRC 1 Confirm the Subwoofer adjustment display. (Select icon as required.)
To skip an adjustment item
RC/Main unit ÷ When an adjustment item is not required to be adjusted, press the MODE key to go to the next adjustment step. GRC ÷ Select only the icons of the adjustment items which require adjustment.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Adjust the level as required.
Sub W
-20dB
To decrease To increase
ENTER
sWch
+ 1)
dB
LEVEL
To decrease
÷ The level can be adjusted between -20 and +10 dB in steps of 1 dB.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Select the "Delay Time".
Delay Time
ENTER
÷ Find the optimum delay time for the listening room by referring to �How to calculate the delay time�. � ÷ The delay time in the PRO LOGIC mode can be adjusted between 15 and 30 ms. ÷ Select the closest value to the value obtained by �How to calculate the delay time�.
If the input level is too high, set it to -6 dB to avoid sound distortion.
÷ The input level can be set to -6 dB or 0 dB. ÷ This adjustment is not available with 6ch INPUT.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Select the "Input Level". 3 Set the input level.
dB
Input Level
LEVEL
ENTER
-6dB
I N P U T @ @@ -6
Each press changes the level.
To decrease
To quit the setup operation:
GRC
Main Menu
ENTER
÷ If no key on the main unit has been pressed for about 5 seconds, the display on the main unit disappears and it returns to the status before the setup mode was entered. ÷ The display on the GRC disappears if no key on the GRC has been pressed for about 10 seconds.
