|
There are currently no product reviews.
 ;
Rapid, clear well done as all the scheme I downloaded from this site. Great job very functional and very useful
;
Great copy of the manual, has all information required for servicing,
;
I work at an authorized service center and I can tell if a manual is as it should be. This one is. It may be a scan, but a very good one at that. The interesting part for me was the curcuit diagram which was scanned at high quality, making it as good as the original. I will definitely be back as a customer. I need not say this, but I will: the price was the best. Thank you owner-manuals.com .
 ;
really a very good manual even sometimes the quality is no so good as before still very readible and very very useful!
;
FAST very good and clear a great unexpensive job!!! very recomended for all people who are preofessional or hobbists as me!!!!!!
NOTE: If the air filter is used when wet,suction is impaired and the motor may be damaged. *EXHAUST AIR FILTER(CV-80D, Fig.10,11) HYGIENIC AIR FILTER(CV-80DC, Fig.10,11)
Your vacuum cleaner has a highly efficient electrostatic exhaust air filter(64)(65) to trap even the finest dust particles in the exhaust air. Once or twice a year,when the filter gets dirty,change the filter as follows. 1. Open the front cover(62)(63). 2. Remove the old filter from the cleaner. 3. Fit a new filter in the cleaner.
Front cover
Fig.10
Air filter
*HEPA CLEAN FILTER(CV-80DP, Fig.12)
Your vacuum cleaner has a highly efficient electrostatic exhaust air filter(64) to trap even the finest dust particles in the exhaust air. Once or twice a year,when the filter gets dirty,change the filter as follows. 1. Open the front cover(62). 2. Remove the old filter from the cleaner . 3. Fit a new filter in the cleaner.
Fig.11
HEPA clean filter
Fig.12
5. FINAL TEST
(1) After reassemblage,run the cleaner for at least 15 minutes and be certain that there in no abnormal vibration. (2) Measure the insulation resistance between the power supply plug and the metal surface by 500V DC insulation resistance tester and be certain that the insulation resistance is not less than 10M ohms.
-6-
|
