The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 14 (click to view)
Venting
The hood is more effective when used in the extraction setting (ducted to the outside). The ducting used must be manufactured from fire retardant material.
Ducting
The ducting must be fire retardant 125mm (5ins) in diameter and the length should be no more than: � 3 metres with one 90° bend � 2 metres with two 90° bend Bends of more than 90° will reduce the efficiency of the hood and reduce the airflow. 1. Remove the two screws on top of the canopy and secure the spigot, fit the spigot (A) on the rectangular air outlet on the top of the canopy using the two screws. Connect the ducting to the ducting spigot (A) using suitable clamps (not supplied). The charcoal filter is not required when installed for extraction. (To remove see maintenance and cleaning section).
2.
3.
Recirculation
The charcoal filter must be fitted for recirculation. When the hood is installed in the recirculation mode, the air is recirculated into the kitchen through the two venting grilles located on either side of the lower Ushaped section.
To fit the recirculation mode
1. Fit the recirculation spigot (F) to the rectangular outlet on top of the canopy and push it down ensuring that the 4 lugs are fitted into the holes. Fit the charcoal filter inside the canopy.
