There are currently no product reviews.
E8GA1BD(EN).fm Page 20 Friday, December 22, 2006 12:57 PM
Track Search
CD MP3 JPEG
Using the Number buttons
There are three ways to begin the playback of a specific track on a disc.
Using the Number buttons
1) Press the Number buttons to enter the desired track number. �Playback will start at the selected track. �For any discs, to play a single-digit track, press the number directly (e.g. for track 3, press 3). �For the disc with less than 100 tracks, to play a doubledigit track, press +10, then the number (e.g. for track 26, press +10, 2, 6). �For the disc with more than 100 tracks, to play a doubledigit track, press +10, 0, then the number of the track. (e.g. for track 26, press +10, 0, 2, 6). To play a tripledigit track, press +10, then the number of the track (e.g. for track 126, press +10, 1, 2, 6).
Using SEARCH
1) During playback, press the Number buttons to enter the desired chapter number. �Playback will start at the selected chapter. �For single digit chapters (1-9), press a single number (e.g. to play chapter 3, press 3). �To play chapter 26, press +10, 2, 6. Note: � Depending on the disc being played, using the Number buttons cannot be performed.
Using SKIP H G
During playback, press SKIP G to go to the next chapter. Press it repeatedly to skip subsequent chapters. Press SKIP H to go back to the beginning of the current chapter. Press it repeatedly to go back to the previous chapter. Time Search
DVD-V CD
1) During playback, press SEARCH repeatedly until the Time Search screen appears on the TV screen.
TOTAL 1:29:00
1) Press SEARCH. �The Track Search display appears. 2) Within 30 seconds, select a desired track number using
the Number buttons.
�Playback will start at the selected track. �For the disc with more than 10 but less than 100 tracks, to play a single-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 3). �For the disc with more than 100 tracks, to play a single or a double-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 0, 3 and for track 26, press 0, 2, 6). �In any other cases, just press the number of the track.
Using SKIP H G
2) Within 30 seconds, enter a desired disc time using
the Number buttons.
�Playback will start at the specified time. �For DVDs, enter a desired time of the current title. �For Audio CDs, enter a desired time of the current track. �Press CLEAR to erase the incorrect input.
Note: �
During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go back to the previous tracks. �If SKIP H G are pressed while the playback is paused, the playback will be paused again after skipping to the next track. �During Dual Playback, using SKIP H G will only affect MP3 tracks. �To skip JPEG files, use s or B. If the �SLIDE SHOW� is set to �MUSIC�, SKIP H G are available for both MP3 and JPEG files. Note: � SKIP H G are not available when playback is stopped. Chapter / Title Search
DVD-V Using SEARCH
�0� appears automatically when there is no need to enter a number. For example, �0:0_:_ _� appears in the Time Search display if the total time of the disc or track is less than 10 minutes. � Time Search is not available on some discs.
DVD-V CD
Marker Setup Use markers to memorise your favourite places on a disc. 1) During playback, press SEARCH repeatedly until the Marker Setup screen appears on the TV screen.
1) During playback, press SEARCH once for the Chapter Search, twice for the Title Search.
/29
2) Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and ensure that �_ _ _ _:_ _:_ _� appears in the display. 3) When the disc reaches the desired point, press ENTER. �The Title or Track and elapsed time will appear on the TV screen. 4) To return to the marker later, press SEARCH repeatedly until the Marker Setup screen appears and s or B to choose the desired marker, then press ENTER. 5) Press SEARCH or RETURN to exit.
Note: �
2) Enter the desired chapter/title number using the Number
buttons.
Opening the disc tray, turning off the power or selecting �AC� at step 2) and press ENTER will erase all markers. � To clear a marker, use s or B and select the marker number to be cleared, and then press CLEAR. � You can mark up to 10 points.
20
EN
