Complete service manual in excellent quality. I am very satisfied!
Text excerpt from page 11 (click to view)
DISASSEMBLY INSTRUCTIONS
4. Insert one end of the Anode Support into the anode button, then the other as shown in Fig. 1-5.
CRT
Support Fig. 1-5
5. Confirm that the Support is securely connected. 6. Put on the Rubber Cap without moving any parts.
2. REMOVAL OF DEFLECTION YOKE
(Refer to Fig. 2-1) 1. Loosen the screw 1. 2. Remove the Convergence � Purity Magnet in the direction of arrow (A). 3. Loosen the screw 2. 4. Remove the 3 Wedges. 5. Remove the Deflection Yoke in the direction of arrow (B).
2 Wedge (B) (A) 1
Convergence � Purity Magnet Deflection Yoke Wedge Fig. 2-1 INSTALLATION Install new Deflection Yoke in reverse steps of REMOVAL. NOTE After adjusting the purity and the convergence, fix the screw 2 and lock the wedges.
