The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 57 (click to view)
Adding Sound to Pictures
You can attach up to two minutes of recorded sound to a selected picture at any time while reviewing your pictures. With Burst and Time-lapse pictures, recorded sound can only be added and played when the series is collapsed. If the camera volume control is turned down, you will not be able to hear the sound you have recorded. 1 Scroll to view the picture you want to select. 2 To record sound, press Record, or press and hold Record. The microphone icon appears on the screen, along with how long you have been recording. Each picture can have only one attached sound clip, up to two minutes in length. 3 Speak into the microphone on the back of the camera. The green ready light blinks when there is three seconds of recording time left before the camera recording turns off. 4 To manually stop recording, press the Record button again, or release Record. A sound icon appears indicating the picture now has attached sound. If a picture has attached sound, pressing Delete lets you delete the sound alone or both the picture and sound. 5 Press one of the following softkeys:
3
� Delete�deletes the picture and any
attached sound.
� Save�saves the sound. � Play�plays the sound
Refer to �Playing Sound, Bursts, and Timelapse Sequences� on page 53 for information on sound that has not been recently recorded. 51
