This manual is very useful because it presents the technical specifications of the cd player, including the manufacturer of the reader, this helps if you need to replace it. It also displays the settings and layout of the circuit.
Text excerpt from page 169 (click to view)
DV MECHANICAL ADJUSTMENT MANUAL VII
3-24.Conversion Gear
1.
1) 2)
Removal procedure
Remove the belt 1 from the conversion gear. Remove the conversion gear 2 from the conversion gear shaft.
2.
1) 2) 3)
Attachment procedure
Apply grease to the conversion gear shaft. Amount of grease: a ball of grease of 1.0 mm diameter Install the conversion gear 2 in the conversion gear shaft. Hook the belt 1 on the conversion gear in a slant angle and install it by rotating the conversion gear with fingertip.
BELT Key Points in Re-assembling
2 Conversion gear
Hook the belt 1 on the conversion gear in a slant angle. Do not remove the capstan motor assy.
1 Belt
The belt must not be twisted.
Conversion gear shaft
Apply Grease Points to be noted
Apply grease when installing it. Amount of grease: a ball of grease of 1.0 mm diameter Apply grease Conversion gear shaft
The belt must not override on the capstan motor block assy.
� The belt must not override on the capstan motor block assy. � When installing the belt, the belt must not have any twisting, dust, scar or grease must not be splashed on belt.