Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Very good scanning quality. All schematics are very legible. Worth every cent !
Text excerpt from page 28 (click to view)
Audio (English) A TitleAdjustment
Equalizer Curve Fine Adjustment
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-LOW/MID/HIGH). Adjusted equalizer curve settings are memorized in �CUSTOM�.
Level (dB)
Q=2N Center frequency
Q=2W Frequency (Hz)
1. Press the AUDIO button for 2 or more seconds to select Equalizer Curve Fine Adjustment. 2. Press the AUDIO button to select the desired band for adjustment. 3. Select the desired frequency with the 2/3 buttons.
LOW: 40 + 80 + 100 + 160 (Hz) = = = MID: 200 + 500 + 1K + 2K (Hz) = = = HIGH: 3K + 8K + 10K + 12K (Hz) = = =
4. Select the desired Q factor with the 5/� buttons.
2N + 1N + 1W + 2W = = = Note:
� If you make adjustments when a curve other than �CUSTOM� is selected, the newly adjusted curve will replace the previous adjusted curve. Then a new curve with �CUSTOM� appears on the display while selecting the equalizer curve. (Refer to page 24.)
